A very good update!!! Thanks for all xSergio74!!  :B

Hi again,
many updates in these days: hoping not boring you too much  :)

The last update of the application is available as usually from https://sr3dbuilder.altervista.org/
It does not contains many news, but just a few but necessaries fixes.
The only significant new is the ability for unregistered users to try the STICKER feature by adding up to 2 sticker to their models.
Loading model with more sticker will causes only first 2 sticker being displayed.

Following the list of what is changed.

Enjoy

Sergio

0.7.3.17 - Changes to previous version (2012.08.29)

Fixed
- Parts with a filename ending with 'H' were not displayed at all
- Connection snapping prevents some parts to correctly align
- Studs connected to a transparent part were incorrectly hidden by the application
- Modifying a Flex do not updates its boundaries box causing problems in reselecting it

Changed
- Unregistered users can add up to two stickers to model to evaluate program feature
- Selecting parts should now be a bit faster due to code optimization
- Updated tire manager association

Not boring at all! Thanks for have us updated with the news!  :guino:

If receiving those updates would mean to get bored, I'd love to get bored then :D

Thanks again Sergio, it's a pleasure to receive your updates as soon as they're released. Nice update pack indeed!

Enviado desde mi Nexus S

Hi everybody,
after about 2 month of hard work, here is my application latest release.

Here is a brief of what is new:

0.7.5.2 - Changes to previous version (2012.10.23)

Added
- New DrawBrickMode allows you select a brick from toolbox by simply drawing its shape
   Refer to the following video for detailed instruction on how to use it

Fixed
- Better part positioning when using Alternative UI (really recommended now)
- A lot of changes and fixes in hinges managements. Now the 8258 robotic arm is working !!
- Racks movevent are sometimes along a wrong direction
- Instruction Miner does not always shows all controls
- Occasionally selecting hidden grouped parts causes application crash
- Using State Buttons in Animation console cause application crash when loading a saved model

Changed
- Updated available part library
- Selecting parts should now be a bit faster due to code optimization

And here are the two videos:
1. DrawBrickMode Instructions: https://www.youtube.com/watch?v=zpU3Ioip3dQ#
2. Near like real world working 8258 robotic arm: https://www.youtube.com/watch?v=r8dSeILvkBM#

Ohh!! the DrawBrickMode it's incredible!!  :aplauso: :aplauso: Thank's

Hi everybody!

here is a small preview video of what you can expect from my application next release.
But you have to be patient a few weeks...

Sergio
https://www.youtube.com/watch?v=IFg4gVZPkfo#

Awesome software!!  :muyfeliz:

Here I'm to announce the latest new release of my application.
Official web site: https://sr3dbuilder.altervista.org/

It takes by far much longer than what I expect, but it worth the waiting!!
Here is a pair of videos to show what I'm talking about:
https://www.youtube.com/watch?v=1z0tnvz8lWw#ws
https://www.youtube.com/watch?v=In4xoQq6JQg#ws

A lot of fixes and some major addiction are available. Here is a list of changes.
Please read carefully for what pneumatic parts are currently supported. More to come...

Fixes
- Drawbrickmode: Slope parts are only partially displayed
- Extra unuseful connection added to Axleholes
- Picking a brick can cause wrong group assignment
- A lot of Pneumatic parts fixed and technic parts cleanup
- Some unwanted parts keep sliding in animation
- Pin with bush was incorrectly managed causing wasting time in animation computation
- The ClearConsole button has no way to cancel the operation
- The Bump Mode option in Animation Console was not saved in model
- Application crashes when loading a model if it has a switch ring (part 6539) not connected to an control handle used in AnimationConsole
- Restoring group view in big models can cause crash when hovering with mouse over model
- Starting an animation AnimationConsole without starting a classic animation before causes nothing to happen or application crash
- Locked Block in Animation Console was not correctly loaded from a saved model
- In animation, all parallel translation keep moving together
- Resetting animations does not reset flexible parts
- If you try to save model in the application folder you can fall into an infinite loop
- Towbar steering has a little wrong movement when used with shock absorber
- Towbar steering could hanging when mixing steer and shock absorber
- Sloped shock absorber were not having correct slide length

Added
- Major addiction: management of some pneumatic parts
    . flexible tubes and air splitters
    . switches (input from central and exit from lateral connections only)
    . small, medium and big pump (not connected to motor)
    . small pistons only
    Pistons speed is still not correctly managed. Be patient...
- Hinge solve now can connect pneumatic pistons   
- A marker showing where DrawBrickMode starts
- Alt + mouse wheel moves selection a whole brick up/down (24 instead of 8)
- Latest lDraw official update has been included
- Many technic parts addiction to Mirror List

Changes
- to easily connect a piston to engine cylinder do the following:
    Enable Alternative UI (by pressing <U> key)
    align piston to cylinder moving mouse and holding LMB pressed and then release it
    correct orientation by pressing keys (you cannot click the pivot arrows while in UI) to rotate piston (don't mind if piston will move following your cursor)
    hoove to the ball over the rod to connect the piston
    Easyer to do than to explain. Try it!

Es impresionante la evolución del este software!! Bravo!!  :aplauso: :aplauso:

This is just amazing.

Me quito el sombrero con el trabajo de este muchacho.

Hi everybody,

after another loooong wait, here is my latest release available as always from https://sr3dbuilder.altervista.org/

Most important news are:
- Extended functionality with pneumatic (still a bit buggy, but can't wait show my progress)
- Extended animation capabilities as shown in the videos

here is a complete list of changes (most bug fixes, but maybe some new bug also...)

Version 0.8.9.16

Fixed

- Importing a model with assemblies in a empty model can cause application crash
- Bad Differential animations expecially when double geared. It is important that the orbital gear is placed orthogonally  to the transmission axle
- Sometimes a gear connection may interfer with a universal joint
- Importing a model causes first element of the imported group is assigned to Model (root) group
- Fixed some particular usage of PinBushes (at the cost of a some delay in solution computational of big models)
- Moving gear or bushes along a vertical axle to place them is now smoother
- Using mirror building with Alternative UI should now work
- Using AlternativeUI now predilige same alignment connections while positioning parts
- Selecting multiple parts was problematic while in AlternativeUI
- You can use the CTRL while pressing PgUp/PgDw to higher or lower selection by a 1/3 brick
- Restored the SetGridToBrick functionality
- Fixed some issues in flex part management
- Trying to change flex color when first placing it crashed the application
- Fixed an issue in quad animation in a 2x3 connection structure
- Trying to change rotation axle while in animation causes application crash
- Small Linear Actuator moving direction

Added
- User interface setting could now be saved in the preference dialog box ONLY
- You can now select and move a flex part when using the "Select Connected" option. Clicking on a flex part for starting selection is not recommended anyway!!
- Patched parts: battery box, Medium Powerfunction Motor
- Models backup files can now be disabled
- Support for medium size pneumatic pistons
- More complicated mechanism computation are now supported like the Theo Jansen's mechanism

Changed
- Now the program pre-detects triangled undeformable structures to allow less errors in mechanism computation
- Drastically reduced part list loading time

And finally the videos (any comment is welcome  :P  )
- Theo Jansen Walker https://www.youtube.com/watch?v=f8Om1Tk4_5Q#
- Partial 8110 pneumatic arm https://www.youtube.com/watch?v=jqvASDfQVH0#

Thanks xSergio74 for sharing this!!!

Enviado desde mi Galaxy Tab2 usando Tapatalk2 HD

Hi everybody !!
As promised, even if a week later, here is another program update.

Before continue: if someone downloaded the program on September 2, 2013 before this announce, probably got a wrong version. If this is the case, download again from now.


Most important new is support for Mindstorm EV3 parts and a bounce of bug fixes.

As often, here is a presentation video: https://www.youtube.com/watch?v=789rUyiNy_s#

Follow a list of changes:

Fixed
- Flexible parts with fixed length can freeze the application
- Hinge Solver now works with 32494.dat parts: just place on their final position and select both of them with the Hinge Solver tool
- Hinge Solver now works with Universal Joint 3L in all cases
- Mirror building now works again
- Using Half pin with stud part can occasionally lead to an error
- Some gears interferences in particular compact mechanisms

Added
- Support for Mindstorm EV3 parts (Thanks to Philo for this!!)
- Latest Official and Unofficial lDraw parts update

Hi again,

a new version of my program has just been released.
It has some much requested and very interesting new features all about copy parts.
Following is a brief of what is new.
Also I recommend you to have a look to the 4 videos to learn on how to use the new features.

Since I don't post latest 2 updates on this forum, for the ones interested, here is a link to the missed new features last introduced:
https://sr3d.spoonclan.com/viewtopic.php?f=19&t=717
https://sr3d.spoonclan.com/viewtopic.php?f=19&t=724

Enjoy building !

Sergio
PS: If you installed new version and get an error starting the application, please download and install it again (missed a dll in the package)

0.9.5.9 - Changes to previous version (2014.02.14)

Fix
- Starting Mirror building with a selection do not causes selection deletetion
- Program installation now works correctly and let you choose program installation path

Added
A lot of enhancements in selection copy. Some limitation with unregistered version.
it is recommended to look at the videos for new features instructions
- the mirror copy selection feature
- Selection can now be easily duplicate in a rectangular array region or just its perimeter
- Creation of regular polygons based on your current selection and two connection points
- Creation of star based shapes based on a selection and a center rotation point
- Update parts availability

https://www.youtube.com/watch?v=cwNQ-MA-zZE# https://www.youtube.com/watch?v=vWD6L5Ohcbg#